top of page
BLANKS I EPS
EPS is one of the most used materials by several board factories in Brazil and the world!
Our production is focused on high density EPS blocks for performance boards.
Price List - MICROCELL EPS
Density
Model
Type
measurements
Unitary value
32 kg/m³
6'4"
6'10"
w stringer
With stringer
w stringer
With stringer
6'4 x 21 x 3 3/16"
Full Concave 3/16"
USD 44.00
USD 50.00
6'10 x 24 x 3 3/8"
Full Concave 1/4"
USD 56.00
USD 64.00
Official Distributors
RS, SC and PR
FiberGlass Florida
>> Luciano Dantas
+55 48 3246-0538
Florianópolis - SC
fglassfloripa@gmail.com
SP (CAPITAL and COAST)
Surfboard Flucas
>> Felipe Lucas
+55 11 97765-7978
Sao Sebastiao - SP
felipelucasshaper@hotmail.com
RJ
Crivella Surfboards
>> Crivella
+55 21 98007-8151
Rio de Janeiro - RJ
eduardocriva@hotmail.com
ES
SurfGlass
>> Gustavo Lima Martins
+55 27 98121-1918
Guarapari - ES
cliffsurfboards@gmail.com
BA, SE and AL
Crivella Surfboards
>> Eduardo Crivella
+55 21 98007-8151
Rio de Janeiro - RJ
eduardocriva@gmail.com
PE, PB and RN
SurfGlass
>> Gustavo Lima Martins
+55 27 98121-1918
Guarapari - ES
cliffsurfboards@gmail.com
EC
D'Cofibras Fiberglass
>> Alex Dourado
+55 85 98797-2700
Fortaleza - CE
alex@dcofibras.com.br
CARBONTEC
We developed the CARBONTEC Technology, EPS blanks with Carbon Fiber stringers with special cuts that increase the durability of your board and give you more projection in the entry and return of maneuvers!
CARBONTEC blanks use Carbon Fiber spars that have much more strength and withstand a much greater bending than wood, making the board not break easily and return much more thrust and projection in maneuvers because it does not lose its flexibility with the course of time.
Fiberglass Fabric
Carbon fiber
high density EPS
CARBONTEC
Carbon fiber
Special Cut
stringer
high density EPS
.png)
HIGH PERFORMANCE
HIGH RESISTANCE
.png)
.png)
DURABILITY
COST BENEFIT
More projection on entry and return of manoeuvres.
LET'S UNDERSTAND...
Traditionally, surfboard stringers are made of wood and the most used are Caixeta and in some cases even maderite, and when we see a broken board the first reaction is to think that the blanks is bad or the lamination is fragile.
Wood has flexibility, however, no more than EPS or polyurethane blank. In this way, when a situation causes the board to flex a lot and the wood reaches its maximum flexibility, it cracks and starts to break, consequently breaking the blank and the lamination structure, not to mention that over time the wood starts to lose its flexibility and it gets harder and harder, taking away the flexibility of the surfboard.
On boards without a stringer, it is easy to see that they can flex much more because the wood is not in the middle of the blank, consequently holding much longer before breaking.
GUYS WHO USE AND APPROVE!
'Cause I need my next surfboard,
with CARBONTEC block, either KosBlanks...
Innovation is there in all sectors, and the surf sector is also developing a lot.
This is KosBlanks ' mission , to bring possibilities for your surfing to evolve and for access to products to be increasingly present in the lives of surfers .
The carbon fiber spar is very flexible and the thrust in the maneuver is much greater. The Surfer quickly adapts to the sensitivity and projection of the board, both in a small sea and in a thicker sea.
Your board will not break easily, it will last longer and you will feel the evolution and development of the maneuvers .
bottom of page